与铁路同台驳接地铁站台排烟方案探讨

针对地铁、国铁同台驳接入铁路枢纽的地铁车站,地铁地面站台位于交通枢纽内部的特殊形式,站台层的排烟方案需根据建筑形式进行特殊考虑。对站台层的排烟方案进行对比分析,通过火灾烟气模拟,对烟气自然扩散、自然排烟和机械排烟3种排烟方案进行对比分析。烟气自然蔓延条件下,能见度无法保证人员安全疏散。由于建筑形式的特殊,无法满足自然排烟条件。为保证安全,设置了机械排烟系统。对与国铁站房结合的综合枢纽中地铁车站排烟方式,应将自然排烟的可行性纳入其初期建筑方案中优先考虑。     

铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

编队飞行中基于危险区域的后机最优位置研究

编队飞行是实现民航绿色发展的重要措施之一。在前机尾涡危险区域分析的基础上，科学确定后机最优位置是编队飞行的关键。首先，以随机两阶段尾涡消散模型为基础，利用Hallock-Burnham涡模型和诱导滚转力矩系数模型分析后机诱导滚转力矩系数的演变规律。然后，基于设定的安全阈值，给出前机尾涡危险区域，并考虑飞行高度、速度和风对危险区域的影响。最后，基于后机不同位置处的燃油流量减少率，得出编队飞行中后机最优位置。研究结果表明：后机诱导滚转力矩系数随着前、后机之间横向距离的增加，呈先增后减再增的趋势；随纵向距离的增加，呈先缓慢减小后快速减小的趋势；高度越高、速度越小，诱导滚转力矩系数的峰值越高。飞行高度越高、速度越小，前机初始尾涡的危险区域越大；随着纵向距离的增加，危险区域不断减小，并随涡核的下沉不断下降。侧风使危险区域发生偏离，侧风越大，偏离程度越大。顺风会增加危险区域的纵向距离，顶风则与之相反。两架B737-800飞机在12000 m高度以0.78马赫数进行编队飞行时，前、后机纵向距离3000m处，无风情况下后机最优位置为横向距离30 m 或-30 m、垂直距离29 m，此时燃油流量减少率为7.01%。相较于无风，左侧风20 m·s -1 下，燃油流量减少率和垂直距离不变，横向距离增加；顺风20 m·s -1 下，燃油流量减少率增加，横向距离不变，垂直距离减少；顶风20 m·s -1 下，燃油流量减少率减小，横向距离不变，垂直距离增加。     

Simulation-based severe weather-induced container terminal economic loss estimation

Container terminals play a critical role in maritime supply chains. However, they show vulnerabilities to severe weather events due to the sea–land interface locations. Previous severe weather risk analysis focused more on larger assessment units, such as regions and cities. Limited studies assessed severe weather risks on a smaller scale of seaports. This paper aims to propose a severe weather-induced container terminal loss estimation framework. Based on a container terminal operation simulation model, monthly average loss and single event-induced loss are obtained by using historical hazard records and terminal operation records as model inputs. By studying the Port of Shenzhen as the case study, we find that the fog events in March lead to the longest monthly port downtime and the highest monthly severe weather-induced economic losses in the studied port. The monthly average loss is estimated to be 30 million USD, accounting for 20% of the intact income. The worst-case scenario is found to be a red-signal typhoon attack which results in nearly 20% decrease in the month’s income. The results provide useful references for various container terminal stakeholders in severe weather risk management.     

A maritime safety on-board decision support system to enhance emergency evacuation on ferryboats

Planning emergency evacuation operations in a proactive manner in public marine transportation systems is a critical success factor for passenger and crew safety. Despite the fact that there is a growing attention on safety issues for marine transportation systems, providing a real-time decision support for evacuation planning under different emergency conditions has not yet been addressed. In this context, this paper contributes to the related literature by providing a comprehensive methodology including simulation and statistical analysis along with a three-module decision support system (DSS) for ferryboat emergency evacuation. Emergency evacuation and fire environment are simulated via Maritime EXODUS V5.1 and SMARTFIRE V4.3, respectively. The methodology is applied to a real-life Ro-Ro ferry, and the results not only revealed significant factors on emergency evacuation performance, but also demonstrated the validity of the developed decision support system.     

多车道高速公路出口开口段安全特性分析

为研究不同断面形式下的多车道高速公路出口影响区开口长度及流量与交通安全的关系，针对2种断面形式的高速公路出口，分别设计了3种不同的开口长度，结合3种不同流量条件设计了18个不同的驾驶模拟场景。实验招募30名被试者开展模拟驾驶实验，提取不同开口长度及流量条件下各断面形式高速公路出口的车辆行驶轨迹、换道间隙的选择、减速度、最小 TTC (Time to Collision)等驾驶行为特性参数，综合分析基于驾驶行为数据对不同开口长度的行车风险。结果表明：两种断面形式下，开口长度对于车辆在开口段上的换道点选择存在显著影响；两种断面形式下，1500 m的开口长度能够满足绝大多数驾驶人的换道需求；在换道间隙选择中，大都集中在5~6 s，分离式断面下的开口长度对于低于临界间隙的换道间隙出现的频次具有显著影响；流量及开口长度对于最大减速度及TTC最小值和分布位置均不存在显著性影响，但分离式断面下的最大减速度和最小TTC相较于整体式断面更小；此外，整体式断面中内侧3车道的行车风险低于分离式断面，分离式断面中外侧车道的行车风险低于整体式断面。     

新型竖直轴海洋能发电设备叶片的优化与仿真

为深入了解新型竖直轴海洋能发电设备的性能,对其叶片结构的流场特性和设备在流场中的动力收集特性进行仿真研究.建立不同结构叶片和不同数量叶片的二维模型,通过仿真计算,得到不同结构叶片的流场状态,以及叶片数分别为3、4和6时设备的合力和转矩大小.研究结果表明:在矩形叶片上开长方形孔能明显改善叶片后方的涡流,提高叶片的性能;当入口速度不变时,设备所受合力和转矩会随叶片数量的增加而增大;当叶片数量不变时,设备所受合力和转矩会随入口速度的增加而增大.研究结果可为新型竖直轴海洋能发电设备的结构设计与优化提供参考.     

秦岭马白山隧道新型紧急救援站结构型式研究北大核心CSCD

针对艰险山区高速铁路隧道的防灾救援难题,文章依托秦岭马白山隧道,提出了适合该隧道的新型紧急救援站结构型式,并利用FDS软件模拟隧道内纵向通风时列车着火后的烟气扩散,确定了规范中尚未给出的紧急救援站隔离区长度参数。结果表明:(1)秦岭马白山隧道新型紧急救援站结构型式应包括疏散区、隔离区以及待避救援区;(2)利用FDS数值模拟时,在不考虑纵向通风下,烟气沿下坡方向的扩散长度为295 m;考虑沿下坡方向通风时烟气最远扩散长度为980 m,建议隔离区长度设置为1000 m。     

Consumer preferences and willingness to pay for advanced vehicle technology options and fuel types

The automotive industry is witnessing a revolution with the advent of advanced vehicular technologies, smart vehicle options, and fuel alternatives. However, there is very limited research on consumer preferences for such advanced vehicular technologies. The deployment and penetration of advanced vehicular technologies in the marketplace, and planning for possible market adoption scenarios, calls for the collection and analysis of consumer preference data related to these emerging technologies. This study aims to address this need, offering a detailed analysis of consumer preference for alternative fuel types and technology options using data collected in stated choice experiments conducted on a sample of consumers from six metropolitan cities in South Korea. The results indicate that there is considerable heterogeneity in consumer preferences for various smart technology options such as wireless internet, vehicle connectivity, and voice command features, but relatively less heterogeneity in the preference for smart vehicle applications such as real-time traveler information on parking and traffic conditions.     

仿真技术在舰船设计研究中应用

文章论述了仿真的概念及其在舰船设计研究中的应用,分别对推进系统、舰船航态及船舶电力系统仿真进行了介绍,分析了该技术在国内外的现状及发展方向,提出了我国在这方面应努力的方向。